products
The anti-reflection spray is desinged for matting mirroring surfaces for optical 3D metrology when spatial geometric data have to be collected and measured.
During 3D laser scanning prevents reflection on the surfaces of objects that are to be scanned. The measuring results of high-quality 3D lasers and white-light scanners are optimized when using becaus of the 'Micro-Powder-Effect'. makes possible high data quality based on detailed, accurate und true-to-original 3D scanning results.
is used in the field of optical testing and measurment engineering in connection with the inspection of surfaces, quality control and process control, for 3D analysis of complex surfaces, geometries of components, tools and molds, prototypes as well as injection-molded and pressure die cast parts. Moreover, is used for pipe/wire measurement, fractography, inspection of broken parts, fractured surfaces, crack detection in welding seams and defective surfaces of components as well as bends and complicated surfaces.
is suitable for coating the surfaces of very different kinds of materials such as metals, ceramics, glass, plastics and silicones.
Optimal results are achieved with shiny, transparent, vitreous, dark, particularly black, and problematic surfaces or sensitive morphologies and small geometries with many angles, corners and edges.
When used properly, produces to a fine, white opaque coat on the surface of the object to be scanned. Excellent image quality is achieved because of the homogeneous coating on the surface. There is no "pooling" and the coating is not too wet
The surface will be dry and ready for scanning immediately after the spray has been applied.
The powder coating can be removed quickly and easily, optimally with a cloth, sponge or paintbrush.
settles homogeneously on the surface as a fine powder
displays the surface with extreme attention to detail
dries within seconds; the object is ready for scanning immediately
can be easily removed dry
optimized products so that they are appropriate for different object sizes, depending on the 'field of view' :
Direction of use
Shake can well - about 30 sconds - before use.
Spray for max. 3 seconds for optimal spraying results. shake between individual applications.
Do not use the can upside down.
Always remove any powder residue from the spray nozzle.
is best removed dry. Youtube: How-to-use product-information
was developed using the highest possible technical standards providing continous upscaled product quality.
Should the spraying results nonethless not fulfill your professional demands, please contact us by phone under +49 171 188 5927 (hotline).
WARNING:
Do not inhale the spray! Please wear respiratory protection when using the spray (fine dust).
Do not open the aerosol can by force.
Caution! Extremely flammable aerosol. The can is under pressure: keep away from heat. Danger of bursting.
Highly flammable. Keep away from temperatures above 50° C.
The spray may damage sensitive materials or adhere to rough surfaces. A permanent alteration of the surface cannot be excluded. Please test the compatibility of the materials and removability on an inconspicuous spot.
Please also observe the information on the spray can. If you have any questions, please contact us under: